Label printers



Supported label printers



Manufacturer

Model

Connection

Paper type

Info

Brother*

QL-810W

WiFi. USB*

DK-22205 adhesive, cont.

link

Brother*

QL-820NWB

WiFi. USB*, BT, Eth.

DK-22205 adhesive,cont.

link

Brother*

QL-1100

USB*

DK-22205 adhesive,cont.

link

Sunmi

V2Pro

(built-in printer)

55x25mm adhesive,labels

link

Sunmi

V2s

(built-in printer)

55x25mm adhesive,labels

link

Zebra*

ZQ-310plus

(work in progress)

55x25mm adhesive,labels

link

Zebra*

ZD230d

(work in progress)

55x25mm adhesive,labels

link

* Zebra ZPLII compatibile printers coming soon: WiFi, Eth. and USB* All non-listed Brother QL series (except QL-600b) can be added later* USB printing requires user interaction every time the printer is first connected or powered on.* USB printing will be available starting from August 2023.

Brother QL-___W series WiFi setup

Brother QL-810W/QL-820NWB WiFi setup

Client separation should be disabled in the WiFi AP network settings, because devices should be able to reach each other. On public hotspots, this setting is active by default, so devices cannot reach each other.

Requirements:

Windows or Mac PC with adminitrative rights for software installation

USB-B - USB-A printer cable (Included in the printer box)

Internet connection

Driver installation:

Do not connect the printer before installation!

Driver download:

QL-810 BG Win11 https://support.brother.com/g/b/downloadend.aspx?c=bg&lang=bg&prod=lpql810weuk&os=10069&dlid=dlfp100971_000&flang=229&type3=347QL-820NWB BG Win11 https://support.brother.com/g/b/downloadend.aspx?c=bg&lang=bg&prod=lpql820nwbeuk&os=10069&dlid=dlfp100971_000&flang=229&type3=347

Select the printer model:

Select the connection method:

Connect the printer via USB and click "Finish"

Wait a minute or two for background installations or restart the PC

Printer Setting Tool download:

Windows 11 BG: https://support.brother.com/g/b/downloadend.aspx?c=bg&lang=bg&prod=lpql810weuk&os=10069&dlid=dlfp101011_000&flang=229&type3=468

Setup printer with Printer Setting Tool

Select the connected printer (if not shown, restart the OS):

Select "Communication settings":

Select "Wireless LAN" tab, and "Wireless settings" section:

Change "Communication mode" to Infrastructure, and fill all wireless data

Click "Apply"

Printer should restart

The QL-810W shows connection status with a blue LED over the WiFi button: flashing light means "searching for network...", stady light means "connected". The QL-820NWB has a display, it shows a wireless symbol at the top of the display. Flashing/animated symbol means "connection...", stady symbol means "connected".

Software settings:

https://bgr.traxpire.cloud/segitseg/books/label-manager/page/setting-up-the-printer

Start the Label manager application

On the Labels view, click the three dot menu, select Settings

Click the large select printer button

The application should find the printer about 1-2 seconds. If no printer is visible, check that the devices are on the same network name and that client isolation is turned off on the WiFi network.

Select the printer

Step back to the Settings, and select proper paper type. It is important, because the printer identifies the paper roll before printing.

Common error messages

ERROR_PAPER_EMPTY : The printer cannot pull the paper roll. There is no paper left, of the roll is too tight.

ERROR_SOCKET_CONNECT_FAILED: The network has been changed. Search the printer again in settings.

ERROR_NO_CASSETE: The printer's lid is open, or the lid sensing switch is faulty, or no roll installed, or the roll doesn't fit well at the bottom part

ERROR_WRONG_LABEL: Wrong paper type selected in allication's Settings or wrong type of roll installed

ERROR_SYSTEM_ERROR: Electrical fault with the printer